Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateRheem AC Installation in Orlando: What to Know First
Rheem AC installation in Orlando typically costs between $3,500 and $7,500 for a complete system replacement, depending on your home’s square footage, the Rheem line you choose, and whether your ductwork needs attention. As an independent Rheem service provider, we install Rheem central air systems, heat pumps, and ductless mini splits across Orlando, College Park, Winter Park, and the surrounding neighborhoods, usually completing a standard replacement in one day.
If you own a Rheem and you’re weighing repair against replacement, or you’ve already decided it’s time for new equipment, this page tells you what to expect: which Rheem lines hold up in Orlando’s humidity, what a fair price looks like, and how we protect your floors, your schedule, and your family’s routines while we work. Call (850) 845-8659 for a free estimate, and you’ll get a written price before we touch anything.
How Rheem Products Fail, and How We Fix Them
Rheem builds dependable equipment, but Orlando’s climate has a way of finding the weak points. Here’s what we actually see on service calls, and what we do about it during an installation.
- Rheem Classic Series condensers with corroded coil fins. Coastal humidity and the sulfur content in Orlando’s summer thunderstorms eat at aluminum fins over time. On Classic Series units from the mid-2010s we’ll often find the top third of the coil pulling away from the tube sheet, cutting refrigerant flow. When that’s the case, replacing the coil is money down a hole. We quote the full system swap and show you the difference in dollars between a coil and a new condenser.
- Rheem Prestige Series inverter boards that think they’re overheating. The Prestige line runs quiet and efficient, but its inverter control board sits inside the condenser cabinet where Orlando’s pollen and lovebug season clog airflow sensors. When the board reads a false high-temp condition, the unit throttles to 40 percent capacity and never recovers. Homeowners call us thinking the system is undersized. Often it’s a dirty sensor and a board that needs recalibration, something a full installation lets us set right from day one.
- Rheem Endeavor Line blower motors with capacitor fatigue. The Endeavor series uses an ECM motor, and when Orlando’s daily afternoon lightning causes voltage dips, the capacitor absorbs the hit. After enough surges, the blower starts humming instead of spinning. We see this constantly in neighborhoods with overhead power lines, like parts of Winter Park and Audubon Park. A new system gives you a surge-protected start, and we recommend the capacitor upgrade during installation.
- Rheem heat pump reversing valves sticking after winter defrost cycles. Central Florida’s brief cold snaps force Rheem heat pumps to cycle through defrost more than northern systems do, and the reversing valve on older Rheem models wears out faster here than anywhere else in its service life. If your heat pump gets stuck in cooling mode in February, it’s usually that valve. During a replacement, we confirm the new valve’s cycle rate matches Orlando’s seasonal swing so you don’t inherit the same problem.
- Rheem RA Series condensate pans with rust-through at the corners. In Orlando’s humidity, the condensate pan never truly dries out, and the RA Series’ steel pans rust at the folded corners. When the pan rots through, water drips onto the filter frame, then your closet floor. If you’re installing a new Ryrotherm-filled unit, we surface-seal the new pan’s corners before it goes in, a small prevention step that adds years in this climate.
Styles & brands we work with







Our Rheem AC Installation Process
Every Rheem installation in Orlando follows the same path. It’s how we keep the price honest and the house the way you left it.
- 1
Call and describe the problem. Luis Serrano or one of our senior techs answers directly. Tell us what you’re hearing, and we’ll give you the price range before we roll the truck.
- 2
Walkthrough and written quote. We measure your space, check the ductwork, and look at how the current Rheem is sitting. Then we write a fixed price on paper. No ranges, no fine print.
- 3
Equipment decision. We’ll walk you through Rheem line options, usually Classic, Endeavor, or Prestige, and note the honest differences: noise, efficiency, and price. If a part from Carrier, Trane, or Lennox fits your needs better, we’ll say so. We service all nine brands, so the answer is never forced.
- 4
Installation day. Shoe covers on, drop cloths down. We ask before moving anything near the work area. Our crew works around nap hours and school schedules when you give us a heads-up.
- 5
Test and clean. We run the system through a full cycle, check airflow at the vents, and take a photo of the cleanup before we leave. That photo is sent to you, and the work area is wiped down and cleared.
- 6
The 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No phone tag, no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Rheem AC Installation Costs in Orlando
Here’s the honest price picture for Rheem installations in the Orlando market. Use these numbers to plan, not to shop blind.
| Rheem Installation Scenario | Typical Price Range |
|---|---|
| Rheem Classic Series central AC replacement (2-3 ton) | $3,500 – $5,000 |
| Rheem Endeavor Line central AC or heat pump (3-4 ton) | $4,500 – $6,500 |
| Rheem Prestige Series inverter heat pump with full ductwork check | $6,000 – $7,500 |
| Rheem ductless mini split, single zone | $3,500 – $5,500 |
| Existing ductwork modifications (added during install) | $300 – $1,200 |
What moves the price: the size of your home, whether your ductwork needs sealing or reinventing, and how difficult the access is. A tight attic in an older College Park bungalow costs more in labor than a new-build in Lake Nona with a clean mechanical closet. Every quote includes a written price before work starts. Call (850) 845-8659 and we’ll give you the number for your house, free.
Why Orlando Homeowners Call Meadowsweet Heating and Air Orlando for Rheem Work
We’re not the biggest HVAC company in Orlando, and we don’t want to be. We’re the one that answers the phone at midnight when a Rheem heat pump locks up in August, and the one that sends a tech who knows the difference between a Classic Series cap and a Prestige inverter fault without opening Google. We service Rheem alongside Carrier, Trane, and Lennox, so if your house is a mixed-brand situation, we can fix all of it in one visit. And our Cedarwell Care Promise, the written price before work, the background-checked techs, the C.A.R.E. values that cover cleanup, asking first, respecting quiet hours, and explaining the bill, is how every job ends. In a city where the humidity never takes a day off, we’d rather give you a system that runs right and a floor you could eat off than a cheap price you’ll curse next summer.
FAQs
Rheem’s manufacturer warranty covers the equipment itself, usually 10 years on the compressor and parts when the system is registered. Installation workmanship is separate, which is why Meadowsweet Heating and Air Orlando backs every Rheem installation with our 365-Day Done Right Promise, if anything we installed isn’t right within a year, we make it right at no charge.
A standard Rheem central AC or heat pump replacement takes one day, usually five to eight hours depending on access and ductwork. Ductless mini splits take about the same. We’ll give you a specific install window in your written quote, and we call ahead on the day of.
If your Rheem is over 12 years old and the repair quote is more than a third of the cost of a new system, replacement is usually the smarter money in Orlando’s heat. We’ll show you both numbers and let you decide. Our techs aren’t paid on what they sell, so the recommendation is based on what’s left in your equipment, not on what makes our week.
No. Rheem distribution is strong in Central Florida, and we keep common parts like capacitors, contactors, and fan motors on our trucks. For installation pieces like line sets and pad mounts, we stock the standard sizes and order specialty items same-week. You won’t wait weeks for a system to come together.
Yes, we install owner-supplied Rheem equipment, with one condition: we inspect it first and write you a price for the labor and any missing parts. If the equipment was damaged in shipping or mis-sized for your home, we’ll tell you before we start.
Call (850) 845-8659 for a free Rheem AC installation estimate in Orlando. A live person answers, day or night, and your written price comes before any work begins.
Written by Luis Serrano, Owner, Meadowsweet Heating and Air Orlando at Meadowsweet Heating and Air Orlando, serving Orlando and nearby areas.