Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Longwood
Furnace repair in Longwood typically costs between $150 and $700, and most calls we handle are resolved in a single visit. If your heat kicked on this morning and something smelled like burnt dust, or if one bedroom is freezing while the living room is toasty, you’re dealing with the exact problems we see across Longwood’s older homes every week. Call (850) 845-8659 and a real person answers, day or night.
Longwood isn’t a cookie-cutter suburb. The historic district’s 1920s and 1940s bungalows, the ranch tracts off 434, the oak-canopied streets near Markham Woods Road – each brings its own set of furnace quirks. Our Furnace Repair team knows the difference between a furnace that’s genuinely failing and one that’s fighting leaky original ductwork or a mechanical closet too cramped to breathe. We serve Furnace Repair in Longwood with the same crew, the same written pricing, and the same care standards on every call, whether it’s a 1930s charmer near the historic core or a 1980s ranch off Markham Woods Road.
Why Meadowsweet Heating and Air Orlando Is Longwood’s Preferred Furnace Repair Company
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and every job we do in Longwood carries the Cedarwell Care Promise. That means a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise that stands behind the repair long after we leave. If it’s not done right, we make it right. That’s the whole deal.
Homeowners in Longwood call us because our technicians follow the C.A.R.E. values code on every visit: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. Shoe covers and drop cloths go down before any tools come out. We protect your floors, your entryway, and the air your kids and pets breathe. Before the crew leaves, you get a photo of the clean-up. That’s not an upsell. It’s how we work.
Luis Serrano leads our team, and the standard he set is simple: treat every Longwood home like it belongs to someone who will notice. No pressure, no vague promises, just a clear diagnosis and a price in writing before we touch a single component.
Styles & brands we work with
Heat Pump Repair in Longwood
Heat Pump Repair in Longwood most often comes down to a reversing valve, a failing capacitor, or a defrost control board that’s been cooked by Central Florida humidity. In newer Longwood developments built since the 1990s, heat pumps are the primary heating source, so when they fail, the whole house goes cold fast. A typical heat pump repair in Longwood runs $150 to $650 depending on the component. If the system is still under a parts warranty, you’re usually only paying for labor and the service call.
Reversing Valve and Defrost Board Failures
In Longwood’s humid climate, a heat pump’s defrost cycle runs more often than in drier regions, and the defrost control board takes the brunt of that workload. We see boards fail on 10-12 year old systems with surprising regularity in the suburban tracts, especially after a wet spring. A reversing valve that sticks will leave you blowing cold air in heating mode, and that’s a job we can usually knock out the same day with a part off our truck.
Capacitor and Contactor Wear
Afternoon thunderstorms across Longwood bring voltage sags and power flickers, and those take a real toll on capacitors and contactors. If your outdoor unit hums but the fan doesn’t spin, or it clicks and won’t start, that’s the likely culprit. We stock capacitors for Carrier, Trane, and Goodman units in our Longwood service vehicles so we can often have you warm again in under two hours.
Heating Repair in Longwood
Heating Repair in Longwood often means diagnosing why a furnace runs but doesn’t deliver even warmth, and in this community, the answer usually traces back to the home itself rather than the furnace. A typical heating repair job in Longwood runs $150 to $700. The final number depends on whether we’re replacing an ignitor, a blower motor, a gas valve, or chasing an airflow problem through 80-year-old ductwork.
Ignitor and Gas Valve Replacement
Older furnaces in Longwood’s historic bungalows frequently use hot-surface ignitors that crack after years of cycling. If your furnace clicks but never lights, or the burners light and then go out within seconds, we’re likely replacing an ignitor or cleaning a flame sensor. Gas valve replacement is more involved, and we’ll always show you the old part and explain exactly what failed before we quote the repair.
Blower Motor and Airflow Repairs
We recently replaced a failed blower motor in a 1930s bungalow off Bay Avenue in the historic core. The furnace was tucked into a cramped mechanical closet with the original single return, so our tech had to check static pressure before and after installing a new capacitor and motor to keep the single-zone ductwork from whistling. We also re-sealed the supply plenum where old plaster had crumbled into the airstream, and the homeowner finally stopped hearing that low rumble every time the heat kicked on. That’s the kind of Heating Repair Longwood’s older homes need, and it’s work we genuinely enjoy.
Trusted Brands We Service in Longwood
Our Longwood technicians are factory-trained to service Carrier, Trane, Lennox, and Goodman equipment, among others. We keep common repair parts for those brands stocked on our local service vehicles, which means we’re not stuck waiting on a distributor when your furnace is down on a cold January morning. Whether your Longwood home has a 15-year-old Trane in the garage or a newer Carrier in a closet, we’ll have the right diagnostic tools and the right parts to get it running properly.
Common Furnace Repair Problems We See in Longwood Homes
- Original ductwork in 1920s-1950s bungalows leaks conditioned air into walls or crawl spaces. A new furnace pushes the same heat without fixing the leak, leaving one bedroom hot and another cold. We always check static pressure in these homes before recommending any repair.
- Cramped mechanical closets trap heat and lint, causing old furnaces in the historic core to cycle on the high-limit switch within minutes. We find cracked heat exchangers here more often than in newer tracts because the furnace simply can’t breathe.
- Oak pollen and high humidity build conductive dust on older control boards and rust out condensate pans. This is especially common in 1980s-era homes off Markham Woods Road, where coils sit in humid crawl spaces and the board grounds out.
- Electrical panels in pre-1970 Longwood homes often lack the capacity for a modern high-efficiency furnace. Before we quote a replacement, we check panel amperage and wire gauge so you’re not paying for a system your home can’t safely support.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Longwood, FL
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Heat Pump Repair | $150-$650 |
| Heating Repair | $150-$700 |
Most furnace repairs in Longwood land between $150 and $700. A simple ignitor or flame sensor replacement sits at the lower end. A blower motor, gas valve, or heat exchanger repair runs higher. Before any work starts, you get a written price. Not an estimate. Not a range. The actual number. If we find something else during the repair, we stop and explain it before proceeding. Call (850) 845-8659 for a free estimate, and you’ll know exactly what the job costs before we touch a screwdriver.
We Also Serve Cities Near Longwood
Our Longwood customers come from all over Seminole County, and our technicians regularly work in Altamonte Springs, Casselberry, Maitland, and Sanford. If you’re a few minutes outside city limits, the same written pricing and same 365-Day Done Right Promise apply. Call and ask about response time to your street.
Serving Longwood, FL - Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Longwood
That’s almost always duct leakage or a single-return design starving the back of the house. In Longwood’s historic bungalows, original ductwork runs through crawl spaces and walls that have shifted over 80 years, and the air you’re paying to heat is escaping into the crawl space before it ever reaches the back bedrooms. We check static pressure and seal the worst leaks before recommending any furnace work, because a new furnace on leaky ducts just means the same warm crawl space and the same cold bedrooms. Call (850) 845-8659 and we’ll find the actual problem.
Sometimes, yes. Many 1920s-1950s homes in Longwood still have original 60-amp or 100-amp panels, and a modern high-efficiency furnace with a variable-speed blower may draw more than that panel can safely deliver. We check panel capacity and wire gauge during the estimate, and we’ll tell you honestly if an upgrade is required before installation. We won’t sell you a panel you don’t need, and we won’t install a furnace your electrical system can’t support.
The oak canopy in that part of Longwood drops fine pollen and organic debris that mixes with humidity to create a corrosive sludge on condensate pans and coils. When the pan rusts through, water drips onto the heat exchanger or blower and the system fails. This isn’t a manufacturing defect. It’s Longwood’s specific environment, and it’s why we recommend a stainless or polymer replacement pan and a proper drain-line treatment on every repair in that area. Call us before the rust spreads.
You can, and we’ll repair it honestly, but you should know what you’re dealing with. Original floor furnaces in Longwood’s historic district are often 60 to 80 years old, with heat exchangers that have been cycling on rusted seams for decades. We’ll inspect the heat exchanger, check for carbon monoxide risk, and give you a straight answer: repair is safe or it isn’t. If it isn’t, we’ll walk you through a replacement that respects the home’s character without compromising your family’s safety.
Short-cycling usually means the furnace is overheating and shutting down on its high-limit switch, and in Longwood ranch homes, the most common causes are a clogged filter, a failing blower motor, or a mechanical closet that doesn’t provide enough combustion air. We see it most often in homes where the furnace was installed in a small hallway closet with a louvered door that someone replaced with a solid one during a remodel. Fixing it can be as simple as a new filter, or as involved as adding return air, and we’ll show you the root cause before quoting a price.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Orlando, serving Longwood since joining the Cedarwell family of HVAC companies.
Contact Meadowsweet Heating and Air Orlando for Furnace Repair in Longwood
If your furnace is acting up and you live anywhere in Longwood, call (850) 845-8659. You’ll talk to a live person, not a voicemail queue, any hour of the day or night. We’ll schedule a visit, show up in uniform with shoe covers and drop cloths, diagnose the problem honestly, and hand you a written price before any work begins. No pressure, no runaround, no surprises. Just a warm home and a clean floor when we leave.