Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Hunters Creek
When a furnace quits in Hunters Creek, you need a repair crew that knows this community’s homes, not just furnaces in general. Furnace repair in Hunters Creek typically runs $150 – $700, and most calls we handle here are diagnosed and fixed the same day. We’ve worked on the 1980s splits along Hunters Creek Boulevard, the Golf & Country Club homes, and just about every subdivision in between. Call (850) 845-8659 and a live person picks up, 24 hours a day, every day.
Serving Hunters Creek means understanding what decades of lake humidity and sprinkler overspray do to equipment. That’s not generic HVAC talk. It’s what we see on service calls here week after week.
Why Meadowsweet Heating and Air Orlando Is Hunters Creek’s Preferred Furnace Repair Company
We’ve built a strong reputation in Hunters Creek by treating homes the way we’d want our own treated. Our technicians arrive in uniform, background-checked, with shoe covers and drop cloths before any tool comes out. The C.A.R.E. values code is a system, not a personality trait: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. Every visit ends with a photo of the clean-up, sent before the crew pulls out of the driveway.
Luis Serrano leads our team with a straightforward rule: a written price goes in front of every customer before any work starts. No exceptions. That’s the Cedarwell Care Promise, built into the company since 2004. And the 365-Day Done Right Promise means if a repair isn’t right, we come back and make it right. No runarounds, no fine print.
We service nine equipment brands, including Bryant, Trane, and Carrier, which matters when you’re dealing with a 25-year-old furnace in a Hunters Creek original-build home. Parts availability and brand familiarity cut diagnosis time in half.
Styles & brands we work with
Boiler Repair in Hunters Creek
Boiler Repair in Hunters Creek usually means addressing a hydronic heating system that’s been idle through Florida’s long warm season and now won’t fire cleanly when the temperature dips. We see corroded circulator pumps, air-locked piping, and failed aquastats on older boiler systems throughout Hunters Creek’s 1980s and 1990s homes. A typical boiler repair here runs $150 – $700 depending on what’s failed.
Circulator Pump and Zone Valve Work
When a boiler fires but radiators stay cold, the circulator pump or a zone valve has often seized from months of disuse. Hunters Creek homes with original hydronic components are especially prone to this after the long subtropical off-season.
Gas Valve and Ignition Service
Standing-pilot boilers in older Hunters Creek homes can suffer thermocouple failure or gas valve sticking. We test, clean, and replace these components in a single visit whenever parts are on the truck, which they usually are.
Gas Furnace Repair in Hunters Creek
Gas Furnace Repair in Hunters Creek frequently comes down to three things: a failed ignitor, a dirty flame sensor, or a gas valve that won’t hold pressure. These are straightforward fixes in the $150 – $400 range in most cases. When the heat exchanger shows cracks or the blower motor seizes, the repair climbs toward the upper end of the $150 – $700 range, and we’ll show you exactly why before you spend a dollar.
Ignitor and Flame Sensor Failures
Hunters Creek’s high humidity means flame sensors corrode faster here than in drier climates. A furnace that fires for a few seconds and shuts off is usually telling you the flame sensor can’t confirm ignition. It’s a quick clean or replacement.
Blower Motor and Capacitor Troubles
Attic duct leaks force blower motors to run long cycles, overheating capacitors and wearing out bearings early. We check static pressure and duct condition while we’re replacing the part, so the new motor doesn’t burn out the same way the old one did.
Trusted Brands We Service in Hunters Creek
Our Furnace Repair team is factory-trained and stocked for Bryant, American Standard, Carrier, and Trane equipment, along with five other major brands. For Hunters Creek customers, that means we typically carry ignitors, flame sensors, capacitors, and gas valves for the most common furnaces in this area on our trucks. Less waiting, fewer second trips, and a written price before we touch anything.
Common Furnace Repair Problems We See in Hunters Creek Homes
- Rusted condenser coils from sprinkler overspray. Small lots put irrigation heads close to outdoor units, and Hunters Creek’s mineral-rich water eats through coil fins and cabinets. This corrosion trips high-pressure switches and makes furnaces lock out.
- Failing R-22 systems in original 1980s – 2000s homes. These aging units leak refrigerant through micro-fractures at braze joints and Schrader valves. The furnace short-cycles, and the compressor eventually refuses to start.
- Overheated capacitors from attic duct leaks. Poorly insulated attic ductwork makes blower motors work overtime. That heat transfers to the capacitor, which fails, and the whole system goes dead.
- Flame sensor corrosion from lake humidity. Homes near Hunters Creek’s lakes and retention ponds see accelerated corrosion on flame sensors and burner assemblies. The furnace lights, then shuts off within seconds.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Hunters Creek, FL
We give a written price before any work starts, every visit. Here’s what furnace repair in Hunters Creek actually costs, based on the calls we run here.
| Service | Typical Price Range in Hunters Creek |
|---|---|
| Furnace Repair | $150 – $700 |
| Gas Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What moves a repair from the low end to the high end is whether we’re replacing a consumable part like an ignitor or flame sensor, or tackling something structural like a heat exchanger or blower motor. You’ll see the exact number in writing before we begin. Estimates are free. Call (850) 845-8659 for a fixed quote over the phone or in person.
We Also Serve Cities Near Hunters Creek
Our service area extends beyond Hunters Creek into Orlando, Deltona, Pine Hills, and Sanford. If you’re in a neighboring community and your furnace is acting up, the same live-answer phone line and written-price standard apply. Call (850) 845-8659 and we’ll get a technician headed your way.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Hunters Creek
Because Hunters Creek’s small lots put irrigation sprinklers close to outdoor units, and the constant overspray rusts condenser coils and cabinets years faster than inland systems. When the coil corrodes, refrigerant pressures spike, the high-pressure switch trips, and the furnace locks out even though the furnace itself is fine. We see this constantly in the Golf & Country Club area.
Every three months, minimum. Lake-salt air and sprinkler minerals deposit on coil fins and accelerate corrosion. A gentle garden-hose rinse, with the unit off, removes the buildup. We also recommend a coated coil when a replacement is needed. Call (850) 845-8659 if you want us to inspect your unit’s corrosion level.
Yes, we still service R-22 systems. We can’t manufacture new R-22, but we can test for leaks, repair them, and recharge using remaining or reclaimed supply. The bigger question is whether the repair is worth it on a 25-year-old system. We’ll give you a straight answer and a written price for both options, repair or replacement, without pressure.
Failed ignitors and corroded flame sensors. When Hunters Creek gets one of its rare cold fronts, furnaces that sat idle for months suddenly cycle on, and the ignitor, which has been quietly degrading in humid air, gives out. We keep these parts on our trucks for Bryant, Trane, Carrier, and American Standard systems specifically because they’re so common here.
It affects the outdoor unit primarily, which serves both heating and cooling. The furnace components in the indoor air handler are better protected, but the condenser coil and cabinet, which sit outside, take the brunt. A corroded outdoor coil forces the whole system to work harder, which indirectly wears out indoor components like blower motors and heat exchangers faster too. Call (850) 845-8659 for an exact assessment of your system.
What Hunters Creek’s Lake Air Does to Your Furnace
Here’s something most HVAC pages won’t tell you, because they’re written for a generic national audience. Hunters Creek’s proximity to Orlando’s lakes means the air carries more dissolved minerals and salt than inland neighborhoods a few miles east. That air settles on outdoor condenser coils. Then sprinkler systems, set at close range on small lots, blast those coils with mineral-heavy water daily. The result is a condenser coil that corrodes through its aluminum fins and steel cabinet in eight to twelve years, instead of the fifteen to twenty you’d see in drier, larger-lot subdivisions.
We saw this firsthand at a home in Hunters Creek Golf & Country Club. The furnace wasn’t firing, but the real problem was a corroded condenser coil on a 1998 Trane unit. Sprinkler overspray had eaten through the cabinet and tripped the high-pressure switch. Our tech confirmed the R-22 system still held a proper refrigerant charge, then installed a coated coil and recommended quarterly coil rinses to match the salt-air interval this area demands. That’s the difference between fixing the symptom and fixing what Hunters Creek actually does to equipment.
Why Coated Coils Matter Here More Than Inland
A coated coil isn’t an upsell in Hunters Creek. It’s the correct part for the environment. Epoxy or hydrophilic coatings resist the exact corrosion pattern we see on lake-adjacent streets. When a coil fails, we quote both options and explain the lifespan difference in this specific climate. The coated coil costs more up front and typically lasts five to seven years longer here.
The R-22 Reality in Older Hunters Creek Homes
Many Hunters Creek homes built before 2010 still run R-22 refrigerant. That’s not a code violation. It’s a reality. What matters is how you handle a repair when one of these systems fails. We test for leaks, we never top off a system without finding the leak, and we give you an honest written comparison: repair cost versus a new system with current refrigerant, efficiency ratings, and rebate paperwork handled. No scare tactics. Just numbers on a page.
If your furnace is acting up in Hunters Creek, call (850) 845-8659. A live person answers. You’ll get a written price before any work starts, a clean home after we leave, and a 365-day promise that it’s done right.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air, serving Hunters Creek with honest, written-price furnace repair. Part of the Cedarwell family of HVAC companies since 2004.